|
Product information > Makrofol > Data sheets
[Datasheet Makrofol® LT 6-4 000000]
light-diffusing film, glass fiber filled,
dazzle-free, translucent, scratch resistant, high inherent
stiffness surface texture fine velvet - fine matte,
standard thickness 420 µm, UL 94 V-2, FMVSS
302, back-light dials and graphics, automotive instrument
panels, hi-fi controls
Datasheet-Download
de
en
| Property | Test Condition | Unit | Standard | Value |
| General properties |
| Density | | g/cm³ | ISO 1183, 20°C method C | 1,41
|
| Mechanical properties |
| Tensile Modulus | | MPa | ISO 527-1,-3 | 5500
|
| Stress at break, parallel | | MPa | ISO 527-1,-3 | 65
|
| Stress at break, across | | MPa | ISO 527-1,-3 | 50
|
| Strain at break, parallel | | % | ISO 527-1,-3 | 3
|
| Thermal properties |
| Coefficient of linear thermal
expansion, parallel | 20 to 120°C | 10-6/K | following DIN 53752 | 50
|
| Coefficient of linear thermal
expanansion, across | 20 to 120°C | 10-6/K | following DIN 53752 | 50
|
| Shrinkage, parallel | 130°C, 1 h | % | following IEC 60674-2 | 0,15
|
| Shrinkage, across | 130°C, 1 h | % | following IEC 60674-2 | 0,15
|
| Burning behavior |
| Burning rate (FMVSS 302) | | mm/min | ISO 3795 | ≤100
|
| Burning rate (UL) | | | UL94 V-2 | passed
|
| Optical properties |
| Light transmittance | | % | ISO 13468-2, following DIN 5036 | ≥80
|
| Other properties |
Water absorption (saturation) | | % | following ISO 62 | 0,2
|
Disclaimer This information and our technical advice - whether
verbal, in writing or by way of trials - are given in good faith but
without warranty, and this also applies where proprietary rights of
third parties are involved. Our advice does not release you from the
obligation to check its validity and to test our products as to their
suitability for the intended processes and uses. The application, use
and processing of our products and the products manufactured by you
on the basis of our technical advice are beyond our control and,
therefore, entirely your own responsibility. Our products are sold in
accordance with the current version of our General Conditions of Sale
and Delivery.
|