
	Bayfol

	Makrofol

		Product Description

	>	Data sheets

	Marnot

	Material Safety Data Sheets

	Competence in Color

Bayer Links

General Conditions of Use

Privacy Statement

Imprint

[Datasheet Makrofol® ID 6-2 laserable]

transparent, laserable, high resistance to thermal and mechanical stress, overlay-material in cards
surface texture fine velvet - very fine matte, standard thicknesses 30-150 µm
identity cards, driving licences, passports, credit cards, health insurance cards

Datasheet-Download

Property	Test Condition	Unit	Standard	Value
General properties
Density		g/cm³	ISO 1183, 20°C method C	1,2
Gloss, 60° top side		Digits	ISO 2813	1,5 to 4,5
Gloss, 60° reverse side		Digits	ISO 2813	≤15
Mechanical properties
Tensile Modulus		MPa	ISO 527-1,-3	≥2100
Stress at break, parallel		MPa	ISO 527-1,-3	≥60
Stress at break, across		MPa	ISO 527-1,-3	≥60
Strain at break, parallel		%	ISO 527-1,-3	≥100
Thermal properties
Coefficient of linear thermal expansion, parallel	20 to 120°C	10-6/K	following DIN 53752	70
Coefficient of linear thermal expanansion, across	20 to 120°C	10-6/K	following DIN 53752	70
Shrinkage, parallel	130°C, 1 h	%	following IEC 60674-2	<0,5
Shrinkage, across	130°C, 1 h	%	following IEC 60674-2	<0,5
Optical properties
Light transmittance		%	ISO 13468-2, following DIN 5036	80
Other properties
Water absorption (saturation)		%	following ISO 62	0,2

Disclaimer

This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to check its validity and to test our products as to their suitability for the intended processes and uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products are sold in accordance with the current version of our General Conditions of Sale and Delivery.