|
Product information > Makrofol > Data sheets
[Datasheet Makrofol® DE 1-1 000000]
high transparency, optical quality
surface
texture both sides gloss, both sides masked with a protective
masking, standard thicknesses 125µm - 1000 µm
nameplates,
panels, medical packaging
Datasheet-Download
de 
en
| Property | Test Condition | Unit | Standard | Value |
| General properties |
| Density | | g/cm³ | ISO 1183, 20°C method C | 1,2
|
| Gloss, 60° top side | | Digits | ISO 2813 | ≥99
|
Gloss, 60° reverse side | | Digits | ISO 2813 | ≥99
|
| Roughness R3z, top side | | µm | following ISO 4287/88 | ≤0,5
|
| Roughness R3z, reverse side | | µm | following ISO 4287/88 | ≤0,5
|
| Mechanical properties |
| Tensile Modulus | | MPa | ISO 527-1,-3 | ≥2200
|
| Stress at break, parallel | | MPa | ISO 527-1,-3 | ≥70
|
| Stress at break, across | | MPa | ISO 527-1,-3 | ≥70
|
| Strain at break, parallel | | % | ISO 527-1,-3 | 150
|
| Thermal properties |
| Coefficient of linear thermal
expansion, parallel | 20 to 120°C | 10-6/K | following DIN 53752 | 70
|
Coefficient of linear
thermal expansion, across | 20 to 120°C | 10-6/K | following DIN 53752 | 70
|
| Shrinkage, parallel | 130°C, 1 h | % | following IEC 60674-2 | <0,4
|
| Shrinkage, across | 130°C, 1 h | % | following IEC 60674-2 | <0,4
|
| Burning behavior |
| Burning rate (FMVSS 302) | | mm/min | ISO 3795 | ≤100
|
| Optical properties |
| Light transmittance | | % | ISO 13468-2, following DIN 5036 | >80
|
| Other properties |
Water absorption (saturation) | | % | following ISO 62 | 0,2
|
Disclaimer This information and our technical advice - whether
verbal, in writing or by way of trials - are given in good faith but
without warranty, and this also applies where proprietary rights of
third parties are involved. Our advice does not release you from the
obligation to check its validity and to test our products as to their
suitability for the intended processes and uses. The application, use
and processing of our products and the products manufactured by you
on the basis of our technical advice are beyond our control and,
therefore, entirely your own responsibility. Our products are sold in
accordance with the current version of our General Conditions of Sale
and Delivery.
|
Print