| Property | Test Condition | Unit | Standard | Value |
| Rheological properties |
| | Shrinkage, parallel | 90 °C; 1 h | % | IEC 60674 | <= 0.4 |
| | Shrinkage, across | 90 °C; 1 h | % | IEC 60674 | <= 0.3 |
| Mechanical properties (23 °C/50 % r. h.) |
| | Tensile modulus | 1 mm/min | MPa | ISO 527-1,-3 | >= 2100 |
 | Stress at break, parallel | 100 mm/min | MPa | ISO 527-1,-3 | >= 55 |
| Stress at break, across | 100 mm/min | MPa | ISO 527-1,-3 | >= 55 |
| Strain at break, parallel | 100 mm/min | % | ISO 527-1,-3 | >= 120 |
| Thermal properties |
| | Coefficient of linear thermal expansion, parallel | 20 to 120 °C | 10-6/K | DIN 53752 | 80 |
| | Coefficient of linear thermal expansion, transverse | 20 to 120 °C | 10-6/K | DIN 53752 | 80 |
| Other properties (23 °C) |
| | Roughness | R3z; Top Side | µm | b.o. ISO 4288 | <= 0.5 |
| | Roughness | R3z; Reverse Side | µm | b.o. ISO 4288 | <= 11 |
| Density | | kg/m³ | ISO 1183 | 1200 |
| Gloss | 60 °; Top Side | - | ISO 2813 | >= 99 |
| Gloss | 60 °; Reverse Side | - | ISO 2813 | <= 15 |
| Material specific properties |
| | Luminous transmittance (clear transparent materials) | D65 | % | ISO 13468-2 | >= 80 |
This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to check its validity and to test our products as to their suitability for the intended processes and uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products are sold in accordance with the current version of our General Conditions of Sale and Delivery.
Print